Interface meter Heron ATEX

Interface meter Heron ATEX

  • Measures interface levels between two liquids
  • Certified intrinsically safe to ATEx, IECEx, CSA, and UL standards
  • Detect floating product (LNAPL), sinking product (DNAPL) and water
  • Ideal for use in hazardous environments for Remediation Sites, Oil & Gas, Chemical and Petrochemical Industries
  • Modular Design makes for inexpensive and easy repairs

Description

Características

  • Measures interface levels between two liquids
  • Certified intrinsically safe to ATEx, IECEx, CSA, and UL standards
  • Detect floating product (LNAPL), sinking product (DNAPL) and water
  • Ideal for use in hazardous environments for Remediation Sites, Oil & Gas, Chemical and Petrochemical Industries
  • Modular Design makes for inexpensive and easy repairs

Description

The H.OIL Oil/Water Interface meter is used to measure the interface level between two liquids in the same tank, vessel, well or aquifer. The dissimilar density of two liquids means the lower density, non-conductive product (LNAPL) will float on top of the higher density, conductive liquid (water). Denser products will tend to sink (DNAPL), creating a layer under the water. The premium padded carry case comes included to protect your precision instrument from the elements.

The hydrocarbon resistant Kynar™ jacketed, high tensile steel core tape is able to withstand hydrocarbons, solvents and other harsh contaminants. The intrinsically safe certification (ATEx, IECEx, CSA, UL Standards) makes the H.OIL ideal for use in hazardous environments by Oil & Gas, Chemical and Petrochemical Industries.

Features:

  • Detect LNAPL/DNAPL and water interfaces with layers as thin as 0.75mm (0.03”)
  • Optical sensor works in direct sunlight
  • Narrow diameter 5/8” (16mm) Interface Probe
  • Fully sealed and removable water-proof electronic panel.
  • Tripple sealed and removable electronic probe.
  • Best in class battery life.
  • Integrated self diagnostics and modular construction make troubleshooting and repairs easy
  • Fully certified for use in hazardous environments (ATEx, IECEx, CSA, UL Standards)
  • Adjustable volume control to protect your hearing
  • Stainless bearing for smooth winding
  • Audible and visual indicators
  • Built in well hanger and roller to protect your tape.

Included:

  • Premium Stainless Steel Kynar Coated Tape
  • Certified intrinsically safe to ATEx, IECEx, CSA, and UL standards
  • 5/8” (16mm) Interface Probe (IP68)
  • Electronic Panel with audio and visual signals (Fully waterproof)
  • Grounding Lead and organizer strap
  • Vinyl, ergonomic holding grip
  • 9V Battery
  • FREE Backpack Carrying Case w/ adjustable straps, laptop & notepad pouches
  • Test bottle
  • Cleaning brush and pad
  • Tape rewind safety marker
  • 2 Year Warranty

Operation

When taking measurements it is suggested to lower the probe until the top of the water/product is reached.
Water is indicated by an intermittent tone and the presence of product is indicated by a continuous tone. Note the depth marking on the tape. DO NOT attempt to measure the product/water interface at this stage.
Allow the probe to pass through any product in the water below (indicated by the intermittent tone). Now slowly withdraw the probe until the tone changes from intermittent to continuous.
This point indicates the base of the product tick. Note the depth marking on the tape.

This method prevents product from being drawn into the water giving false interface readings.

Additional information

Sondas Heron FR

100m, 200m, 300m, 30m, 450m, 600m, 60m

You may also like…