Water

Showing 1–25 of 44 results

• 

  104 Sonic water level meter

  The Sonic Water Level Meter is a portable, acoustic ranging instrument designed to simply and quickly measure depth to static water level in a well, piezometer, sounding tube, or any closed pipe. Depth measurements to 600 m
• 

  12 Volt sampling pump Geosub2

  Designed with all stainless steel components, the Geosub 2 allows you to sample with confidence even in the harshest well conditions. The Geosub 2 operates with the Geotech Geosub 2 Controller.

  Available in 30m, 45m, 60m
• 

  12V Submersible Pumps

  Ideal for environmental work, purging, small cleanings and groundwater sampling in 2 “wells. The pumps have an electric cable for maximum pumping measurement and a double battery connector and car plug (only for shallow pumps). 12V supply.
• 

  403 Multilevel System

  The Multilevel CMT System provides greater accuracy to the monitoring of the polluting plume making it more economically accessible.
• 

  425 Discrete Interval Sampler

  The Model 425 is a discrete interval sampler that allows groundwater samples below the hydrocarbon layers (floating or heavy) to be obtained at desired depths without cross contamination of the upper layers.

  Available for rental
• 

  429 Point Source Bailer

  Point source sampling is ideal for obtaining high quality, representative samples of groundwater from specific depths. It allows the collection of water that has just flowed into a well at the desired sampling point. This can avoid purging and disposal of purged water.
• 

  Checker Chromium VI

  Chromium is one of the elements that can be found in wastewater from a wide variety of industrial processes. Its toxicity depends on the oxidation state and concentration in which it is found, being of special importance the elimination of hexavalent chromium present in aqueous systems, as it is harmful to health.
• 

  Colloidal Borescope

  Characterizes groundwater flow velocity and identifies preferential flow zones.
• 

  Conductivity Plus water level meter Heron

  The Heron conductivity plus Level and Temperature Meter accurately measures conductivity, water level and temperature in wells, boreholes, stand pipes and open bodies of water.

  • High-tensile steel core tape, tested for stretch resistance to ASME standards
  • 4-electrode conductivity probe displays values up to 80,000 micro-siemens
  • Probe is 7/8″ diameter x 5.5″ long (2.2cm x 14cm)
  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Datagrabber 5

  The Model 3001 DataGrabber 5 provides an inexpensive, and very portable option for Solinst datalogger users to download data directly to a USB flash drive key.
• 

  Disposable bailers

  Disposable bailers in polyethylene, PVC or Teflon are simple and inexpensive devices that allow sampling in wells (groundwater) or tanks.
• 

  Disposable in-line filters

  Disposable in-line filters of .45 microns and 700 cm2 of filtration area for metal sampling. They are specifically designed for the preparation of groundwater samples for the analysis of dissolved metals and to filter large volumes of cloudy groundwater.
• 

  Environmental sampling station

  The patented FieldSink® Environmental Sampling Station is a portable system that offers hands-free sample collection and preparation in the field. It’s simple, yet innovative design revolutionizes the industry standard of tried and true low-flow and purge and sample methods. Engineered with sample integrity and quality control in mind, FieldSink® improves efficiency and safety while reducing waste.
• 

  Equilibrator. Diffusion sampler

  The Equilibrator Diffusion Sampler is a proven equipment for determining concentrations of volatile organic compounds (VOCs) in wells and piezometers.
• 

  Fultz Electric Pump

  The Fultz pump enables efficient and reliable sampling and purging in wells and piezometers up to a depth of 45m.
• 

  Geocontrol bladder pump

  The bladder pump is used for quality and contamination monitoring in groundwater. These teams pump to the surface causing minimal agitation obtaining more representative samples.
• 

  Geopump peristaltic pump

  Geopump peristaltic pumps are designed for water sampling. They operate by mechanical peristalsis, so the sample only comes into contact with the hose, preserving its integrity.
• 

  HydraSleeve. Purge-free sampling

  The HydraSleeve is a disposable 2” well sampler with no need to purge.
• 

  Hydrolift II Motor

  The Hydrolift II motor is a portable electric pump used for well development with the Waterra system.

   

   
• 

  Interface meter Heron ATEX

  • Measures interface levels between two liquids
  • Certified intrinsically safe to ATEx, IECEx, CSA, and UL standards
  • Detect floating product (LNAPL), sinking product (DNAPL) and water
  • Ideal for use in hazardous environments for Remediation Sites, Oil & Gas, Chemical and Petrochemical Industries
  • Modular Design makes for inexpensive and easy repairs
  Select options This product has multiple variants. The options may be chosen on the product page
• 

  KL010 level meter

  Robust reel level probe. Includes acoustic and light alarm signal. Available for rent up to 200m of tape length.

  Available for rental

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Levelogger 5

   The Levelogger 5 records highly accurate groundwater and surface water level and temperature measurements. It combines a pressure sensor, temperature detector, 10-year lithium battery, and datalogger, sealed within a 22 mm x 160 mm (7/8″ x 6.3″) stainless steel housing with a corrosion-resistant coating baked-on using polymerization technology.

  Available for rent.

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Levelogger 5 app interfase

  The Solinst Levelogger® App is designed to communicate with Solinst dataloggers using the Bluetooth® enabled Levelogger 5 App Interface.  Available for Apple and Android versions.
• 

  Levelogger 5 Junior

  The Levelogger 5 Junior provides an inexpensive alternative for measuring groundwater and surface water levels and temperature. The Levelogger 5 Junior combines a pressure sensor, temperature detector, a datalogger, and 5-year battery (based on a 1-minute sampling rate) in one compact 22 mm x 160 mm (7/8″ x 6.3″) stainless steel housing.

  Select options This product has multiple variants. The options may be chosen on the product page
• 

  Levelogger 5 TLC

  The Levelogger® 5 LTC logs water level, temperature, and conductivity. It combines a datalogger, 8-year battery, Hastelloy® pressure sensor, temperature detector, and conductivity sensor within a small waterproof housing, 22 mm x 208 mm (7/8″ x 8.2″). A baked-on coating using polymerization technology protects the body against corrosion, abrasion and high temperatures. The conductivity sensor is a 4-electrode platinum sensor, with autoranging capabilities. The minimal-maintenance, sealed Levelogger 5 LTC is simple to clean and calibrate, even in the field.

  Select options This product has multiple variants. The options may be chosen on the product page