Chercher
Products
Showing 1–25 of 39 results
Absorbent barriers are ideal for absorbing hydrocarbons and chemicals.
The Drizit range of selective absorbents repels water. Due to their hydrophobic nature, they remove the product from the water, floating in it and absorbing it from its surface.
Range of selective Drizit absorbent pads and rolls. Due to their hydrophobic nature, they are ideal for removing product from water. These float in the water absorbing the product from its surface, preventing its sinking even when saturated.
The AC Sipper is a 110-220V single-phase remediation system, designed for recovery applications where electrical power is available.
Active carbon filters for the treatment of polluted water. Available in various dimensions to suit the project in question.
Activated carbon 540 GR is a mineral-based activated carbon in pellet form obtained by thermal activation. It is specially designed for the elimination of volatile organic compounds in gaseous emissions.
Activated carbon 740 GR is a mineral-based activated carbon in pellet form obtained by thermal activation. It is specially designed for the elimination of volatile organic compounds in gaseous emissions.
Activated sodium percarbonate is an oxidizing agent used in in situ chemical oxidation (ISCO) processes that destroys contaminants through powerful but controlled chemical reactions. This technology quickly and efficiently degrades pollutants (petroleum hydrocarbons and chlorinated compounds) through direct oxidation, as well as through the generation of a set of free radical compounds that in turn oxidize recalcitrant pollutants.
Activated Sodium Persulfate is an advanced in situ chemical oxidation reagent (ISCO) that destroys organic contaminants found in groundwater and soil through abiotic chemical oxidation reactions. It is an all-in-one product with a built-in catalyst that activates the sodium persulfate component and generates free radicals that destroy contaminants without the costly and potentially dangerous addition of a separate activator.
Active carbon filters for gas treatment. Available in various dimensions to suit the project in question.
AP2 pneumatic pumps provide maximum performance and flow in 2” wells, achieving full pumping of wells contaminated with light non-aqueous phase liquids (LNAPL).
The AP3 pneumatic pumps are designed for non-severe remediation pumping applications in 3 ”or larger wells, achieving high performance.
The AP4 + Pneumatic Pump is a pneumatic pump used in landfills and remediation sites, specifically designed to withstand harsh conditions reliably and safely. These conditions include hydrocarbon remediation (LNAPL and dissolved phase), pumping of landfill leachate and methane condensate, solvent cleaning (dissolved phase and DNAPL), suspended solids, sediments, corrosives and high viscosities, along with high temperatures and frequent starts and stops.
Available for rent
ATEX submersible electric pumps are suitable for pumping both clean water to water polluted with hydrocarbons, leachate or other pollutants. Availability of ATEX accessories for pumping in areas with risk of explosiveness.
Genie® systems use a high-suction pump to draw free product through a floating inlet that tracks changes in liquid level in the well. This system is self-regulating and only needs one air supply point.
Wide range of containers for the conservation and transport of samples or fluids.
Disposable skimmers allow the absorption of floating water from wells or boreholes in a simple and economical way.
Being composed of oleophilic and hydrophobic absorbent materials, they only absorb hydrocarbons. These skimmers are for single use, once saturated they should not be used again and should be managed in the appropriate waste.
The Emitter is a simple, low-cost device to allow the controlled and uniform release of oxygen or other bioremediators to promote and maintain the growth of macro-organisms required for bioremediation of contaminated groundwater.
ENVIROactiv is a bio-stimulating or bio-activating solution composed of a combination of nutrients and surfactants, formulated to increase the metabolic activity of microorganisms and thus optimize the biodegradation of pollutants.
ENVIRObacter is a solid lyophilized product, containing millions of bacteria capable of carrying out the aerobic degradation of a wide range of hydrocarbons, including gasoline, diesel and crude oil.
Non-ionic, mild and concentrated detergent. Powerful cleaner to remove lime deposits and mineral dirt. Ideal for remodelling operations on very dirty surfaces (pipes, tanks, extractors, etc.). Leaves stainless steel surfaces shiny.
ENVIROnutri is a bio-stimulant solution that contains nutrients that accelerate the growth and biological activity of indigenous soil microorganisms to support the biodegradation processes of contaminated soils.
ENVIROsurf is a concentrated surfactant made up of non-ionic surfactants that give it the ability to efficiently desorb and release different types of contaminants from the subsoil including TPH, BTEX, chlorinated solvents and some heavy metals.
ENVIROxi-ORC is an oxygen release compound (ORC- Oxygen Release Compound) specially designed to stimulate the in situ aerobic bioremediation of hydrocarbons in water and in the saturated zone.
MG 2×6 activated carbon is a mineral-based granular activated carbon obtained by thermal activation. It has a very high capacity to eliminate volatile organic compounds in gaseous emissions.
CG 950 activated carbons are products with a very high capacity to retain contaminants from various fluids. They are activated carbons with excellent results in dechlorination of water, elimination of taste and odor in water.