Products

Showing 1–25 of 116 results

104 Sonic water level meter

The Sonic Water Level Meter is a portable, acoustic ranging instrument designed to simply and quickly measure depth to static water level in a well, piezometer, sounding tube, or any closed pipe. Depth measurements to 600 m
12 Volt sampling pump Geosub2

Designed with all stainless steel components, the Geosub 2 allows you to sample with confidence even in the harshest well conditions. The Geosub 2 operates with the Geotech Geosub 2 Controller.

Available in 30m, 45m, 60m
12V Submersible Pumps

Ideal for environmental work, purging, small cleanings and groundwater sampling in 2 “wells. The pumps have an electric cable for maximum pumping measurement and a double battery connector and car plug (only for shallow pumps). 12V supply.
403 Multilevel System

The Multilevel CMT System provides greater accuracy to the monitoring of the polluting plume making it more economically accessible.
425 Discrete Interval Sampler

The Model 425 is a discrete interval sampler that allows groundwater samples below the hydrocarbon layers (floating or heavy) to be obtained at desired depths without cross contamination of the upper layers.

Available for rental
429 Point Source Bailer

Point source sampling is ideal for obtaining high quality, representative samples of groundwater from specific depths. It allows the collection of water that has just flowed into a well at the desired sampling point. This can avoid purging and disposal of purged water.
Absorbent Barriers

Absorbent barriers are ideal for absorbing hydrocarbons and chemicals.

The Drizit range of selective absorbents repels water. Due to their hydrophobic nature, they remove the product from the water, floating in it and absorbing it from its surface.
Absorbent Pads and rolls

Range of selective Drizit absorbent pads and rolls. Due to their hydrophobic nature, they are ideal for removing product from water. These float in the water absorbing the product from its surface, preventing its sinking even when saturated.
AC Sipper remediation system

The AC Sipper is a 110-220V single-phase remediation system, designed for recovery applications where electrical power is available.
Accesories for hand sampling products

The AMS hand sampling accessory range consists of different elements for effective field sampling.
Activated carbon filter for water treatment

Active carbon filters for the treatment of polluted water. Available in various dimensions to suit the project in question.
Activated Carbon Pellet for air treatment 540 GR

Activated carbon 540 GR is a mineral-based activated carbon in pellet form obtained by thermal activation. It is specially designed for the elimination of volatile organic compounds in gaseous emissions.
Activated Carbon Pellet for air treatment 740 GR

Activated carbon 740 GR is a mineral-based activated carbon in pellet form obtained by thermal activation. It is specially designed for the elimination of volatile organic compounds in gaseous emissions.
Activated sodium percarbonate

Activated sodium percarbonate is an oxidizing agent used in in situ chemical oxidation (ISCO) processes that destroys contaminants through powerful but controlled chemical reactions. This technology quickly and efficiently degrades pollutants (petroleum hydrocarbons and chlorinated compounds) through direct oxidation, as well as through the generation of a set of free radical compounds that in turn oxidize recalcitrant pollutants.
Activated sodium persulfate

Activated Sodium Persulfate is an advanced in situ chemical oxidation reagent (ISCO) that destroys organic contaminants found in groundwater and soil through abiotic chemical oxidation reactions. It is an all-in-one product with a built-in catalyst that activates the sodium persulfate component and generates free radicals that destroy contaminants without the costly and potentially dangerous addition of a separate activator.
Active carbon air filter

Active carbon filters for gas treatment. Available in various dimensions to suit the project in question.
Altair 4X Explosimeter

Altair 4 Explosimeter for gas detection and to ensure safety in the workplace. Available on a rental basis. The rental option includes calibration kit.
AP2 ATEX Pneumatic Pumps

AP2 pneumatic pumps provide maximum performance and flow in 2” wells, achieving full pumping of wells contaminated with light non-aqueous phase liquids (LNAPL).
AP3 ATEX Pneumatic Pumps

The AP3 pneumatic pumps are designed for non-severe remediation pumping applications in 3 ”or larger wells, achieving high performance.
AP4 ATEX Pneumatic Pumps

The AP4 + Pneumatic Pump is a pneumatic pump used in landfills and remediation sites, specifically designed to withstand harsh conditions reliably and safely. These conditions include hydrocarbon remediation (LNAPL and dissolved phase), pumping of landfill leachate and methane condensate, solvent cleaning (dissolved phase and DNAPL), suspended solids, sediments, corrosives and high viscosities, along with high temperatures and frequent starts and stops.

Available for rent
ATEX Electric Pumps

ATEX submersible electric pumps are suitable for pumping both clean water to water polluted with hydrocarbons, leachate or other pollutants. Availability of ATEX accessories for pumping in areas with risk of explosiveness.
Autogenie active skimmers

Genie® systems use a high-suction pump to draw free product through a floating inlet that tracks changes in liquid level in the well. This system is self-regulating and only needs one air supply point.
Basic kit for soil sampling

The original AMS gas vapor probe was designed to extract vapor samples around underground fuel tanks or any container containing a volatile liquid that could potentially contaminate the ground if a leak occurs.
Biogas 5000 Analyser

Portable ATEX infrared analyser for biogas, measures CH4, CO2, O2 and H2S.
Biomethane 3000

The BIOMETHANE 3000, ATEX and IECEx certified, is designed for high accuracy methane and oxygen readings for biomethane applications. Designed for high accuracy methane and oxygen readings for biomethane applications, providing customers with the peace of mind that at first stage production, they will have quality readings above the 95% methane level and below the 1% oxygen level.