Description
Características
The Heron water level meter (Series 1900) allows you to measure the water level in piezometers using an acoustic signal.
Its modular design allows for easy and inexpensive repairs.
- Polyethylene Tape w/ Heat Stamped Marking
- 5/8” (16mm) Water Level Probe (IP68) w/ holder
- Electronic Panel with audio and visual signals (Fully Encapsulated to IP65)
- Sensitivity dial to tune out cascading water
- Vinyl, ergonomic holding grip
- 9V Battery
- Backpack Carrying Case w/ adjustable straps, laptop & notepad pouches
Funcionamiento
For static mode:
When the device beeps (in static mode), carefully measure the water depth indicated on the tape from your reference point (inverted triangle) Raise and lower the probe in and out of the water to ensure a consistent result
For “Dradown” mode:
When the probe is in the water at the desired drain level, press the Change Mode button to “Drawdown” mode, the unit will now be silent in the water and begin pumping water.
Once the water has passed the tip of the probe, the device will emit a sound into the air. Turn off the pump and return the ribbon to static mode
Aplicaciones
Measurement of the piezometric water level using an acoustic signal.
